CornerStone has a variety of products and services including the following:
Electroplating Racks: CornerStone Rack & Tooling has the processing
technology and quality control required to build racks for chrome plating parts.
CornerStone's equipment incorporates the latest technology and is operated by
employees with have been trained in the process of building electroplating
racks. Our core staff have over 100 years combined experience in the rack
and tooling industry and ensure that quality is maintained throughout the
manufacturing process.
The CornerStone core staff experience is vital in building quality plating racks
especially when the substrate is plastic. The only school that teaches
electroplating rack design is the "university of hard knocks" and with over a 100
years of combined experience the core staff at CornerStone are all "graduates". There are a multitude of factors that must be considered when building electroplating racks and these factors can only be clearly understood through experience. A few of the critical factors are electrical current distribution, drainage, and warpage.
CornerStone Rack & Tooling provides fast and reliable service while maintaining a superior level of quality and design in building electroplating racks. Maintaining quality while building modern electroplating racks requires "state of the art" equipment and training. CornerStone takes pride in maintaining our manufacturing facility with some of the best machinery and processes available in the industry. Our highly technical representatives spend an equal amount of time with our clients and on the CornerStone Rack & Tooling Shop Floor.
Paint Racks: CornerStone Rack & Tooling can build paint racks
and fixtures for a variety of finishing operations including powder
coating and wet spray. The CornerStone staff have all the knowledge
and experience to design racks and fixtures from "scratch" or to
improve a design that is not performing to requirements.
As manufacturing line speeds and densities increase, part placement
and positioning become more critical than ever before. The
CornerStone staff have all the design knowledge necessary to
implement modern processing equipment to the most exacting
standards.
Many companies are replacing metal parts with painted plastic parts to reduce weight and
cost in products. The switch to plastics complicates the rack design and production procedures. Plastics are more sensitive to the factors of warpage, drainage, and spacing than metals. CornerStone can custom design paint racks to the most exacting standards required. Our staff have all the skills and experience necessary to work with your molding personnel to ensure that all of your requirements are covered. On every job, no matter how large or small, CornerStone builds welding and adjustment fixtures to exacting standards. So whether you have 1 rack or a 1,000 racks built, CornerStone will build a consistent rack from beginning to end.
Conveyor Racks & Baskets: CornerStone Rack & Tooling can work with
customers from the beginning stages of installing a conveyor
in the plant to the final stages of beginning production.
CornerStone can custom design material handling
equipment for a new manufacturing process or redesign
an existing system to achieve greater efficiency.
Conveyor Rack CornerStone Rack & Tooling has the
capabilities to put whatever finish is required on the conveyor racks or baskets to help reduce manufacturing defects that can be caused by handling and movement. The conveyor racks and baskets can be finished with a plastisol coat, a painted finish, or a combination of both finishing processes. The CornerStone staff have over a 100 years of combined experience in designing and implementing conveyor racks and baskets for the manufacturing and material handling industries. For your next project, please contact us for a quote.
Plastisol Coating: After careful analysis of the market, CornerStone
Rack & Tooling has installed a plastisol coating system with some of the
largest work parameters available anywhere in the industry. CornerStone
can coat items with dimensions 9 feet long, 4 feet wide and 9 feet in
depth with a weight not to exceed 500 pounds.
Having a plastisol coating system this large requires careful attention to
processing quality, efficiency, and environmental controls. CornerStone
Rack & Tooling has carefully addressed all 3 of this requirements.
1. Quality - In order to make certain that our customers receive the finest
work possible, CornerStone purchased and installed modern computer
controlled ovens to consistently maintain the optimum temperature from load to load.
2. Efficiency - Having equipment this costly requires that the plastisol coating process be highly efficient to prevent an unacceptable price point for our customers. CornerStone has installed a highly efficient monorail system that precludes having to "manhandle" the items to be coated. Our staff contributed their vast amount of combined experience in the implementation of the CornerStone plastisol coating system.
3. Environmental Controls - CornerStone Rack & Tooling spared no expense in implementing one of the most environmentally compliant systems in the industry. CornerStone takes great pride in the responsible protection of our environment.
Machine Tooling: CornerStone Rack & Tooling has the capabilities to
provide all the tooling required to implement any industrial part's process
from molding through surface finishing to the installation of the part on the
finished product such as an automobile. We can create all of the tooling
machines to meet the most demanding industry requirements.
CornerStone Rack & Tooling has experience designing and building
degating machines that can cut off all molding runners and plating tabs
as well as trimming flashing on all plastic parts both before and after the
plating process. We have experience with machines that can put metal
clips on assembly tabs to ensure proper installation. We also have
experience with assembly and press machines that can automatically
assemble multiple parts that must fit precisely. These machines can
prevent improper alignment and notify an operator that a part is not within specifications.
CornerStone Rack & Tooling uses name brand components on all machine tooling projects to ensure high quality machinery for industry. We can build all Picture of a machined tool surface finishing and material handling tools and most robotic machinery as well. CornerStone Rack & Tooling provides operator manuals, parts lists and wiring diagrams for every machine so that maintenance personnel will have all the reference material required for troubleshooting and maintenance. For all surface finishing and material handling projects, CornerStone Rack & Tooling is prepared to meet the most demanding requirements of industry.
Designs Services: CornerStone Rack & Tooling LLC can provide all
the design and layout services for surface finishing and material handling
projects. CornerStone Rack and Tooling is a one stop shop that can work
from industry part descriptions and line specifications to complete all the
design services required to complete any surface finishing and material
handling project.
CornerStone Rack & Tooling has experience with conveyor racks, baskets,
material handling equipment, machine tooling, chrome plating racks and
plastic rack plating. The CornerStone Rack & Tooling Facility is equipment
with state of the art equipment so that our staff can efficiently build high
quality surface finishing and material handling tooling to meet industry
requirements.
CornerStone Rack & Tooling has 36 years of experience in creating innovative solutions to meet our client's demanding requirements. Our core staff have a combined experience of 103 years in implementing projects for our clients. As a one stop shop, CornerStone Rack & Tooling can provide all the design services required for the most demanding surface finishing and material handling projects. For your demanding projects, ask us for a quote. You don't have anything to lose but a headache.
